3com S7906E Guide De Référence
1-25
<Sysname> system-view
[Sysname] undo ipv6 hoplimit-expires
ipv6 host
Syntax
ipv6 host hostname ipv6-address
undo ipv6 host hostname [ ipv6-address ]
View
System view
Default Level
2: System level
Parameters
hostname: Host name, a string of up to 20 characters. The character string can contain letters,
numerals, “_”, “-“, or “.” and must contain at least one letter.
ipv6-address: IPv6 address.
Description
Use the ipv6 host command to configure the mappings between host names and IPv6 addresses.
Use the undo ipv6 host command to remove the mappings between host names and IPv6 addresses.
Each host name can correspond to only one IPv6 address.
Examples
# Configure the mapping between a host name and an IPv6 address.
<Sysname> system-view
[Sysname] ipv6 host aaa 2001::1
ipv6 icmp-error
Syntax
ipv6 icmp-error { bucket bucket-size | ratelimit interval } *
undo ipv6 icmp-error
View
System view
Default Level
2: System level
Parameters
bucket bucket-size: Number of tokens in the token bucket, in the range of 1 to 200.
ratelimit interval: Update period of the token bucket in milliseconds, in the range of 0 to 2,147,483,647.
The update period “0” indicates that the number of ICMPv6 error packets sent is not restricted.