3com S7906E Guide De Référence

 

1-27 

Interface view 

2: System level 

None 

Use the ipv6 nd autoconfig managed-address-flag command to set the managed address 

configuration (M) flag to 1 so that the host can acquire an IPv6 address through stateful 

autoconfiguration (for example, from a DHCP server). 

Use the undo ipv6 nd autoconfig managed-address-flag command to restore the default. 

By default, the M flag is set to 0 so that the host can acquire an IPv6 address through stateless 

autoconfiguration. 

# Configure the host to acquire an IPv6 address through stateful autoconfiguration. 

<Sysname> system-view 

[Sysname] interface vlan-interface 100 

[Sysname-Vlan-interface100] ipv6 nd autoconfig managed-address-flag 

Interface view 

2: System level 

None 

Use the ipv6 nd autoconfig other-flag command to set the other stateful configuration flag (O) to 1 so 

that the host can acquire information other than IPv6 address through stateful autoconfiguration (for 

example, from a DHCP server). 

Use the undo ipv6 nd autoconfig other-flag command to restore the default. 

By default, the O flag is set to 0 so that the host can acquire other information through stateless 

autoconfiguration.