3com S7906E Guide De Référence

 

1-24 

Using the filter-policy export command filters only routes redistributed by the import-route command. 

If the import-route command is not configured to redistribute routes from other protocols and other 

OSPFv3 processes, use of the filter-policy export command does not take effect.  

 

# Filter all redistributed routes using IPv6 ACL 2001.  

<Sysname> system-view 

[Sysname] acl ipv6 number 2001 

[Sysname-acl6-basic-2001] rule permit source 2002:1:: 64 

[Sysname-acl6-basic-2001] quit 

[Sysname] ospfv3 

[Sysname-ospfv3-1] filter-policy 2001 export 

filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } import 

undo filter-policy import 

OSPFv3 view 

2: System level 

acl6-number: Specifies an ACL number, ranging from 2000 to 3999.  

ipv6-prefix ipv6-prefix-name: Specifies the name of an IPv6 prefix list, a string of up to 19 characters.  

Use the filter-policy import command to configure OSPFv3 to filter routes computed from received 

LSAs. 

Use the undo filter-policy import command to remove the configuration. 

By default, OSPFv3 does not filter routes computed from received LSAs. 

 

Using the filter-policy import command only filters routes computed by OSPFv3. The routes that fail to 

pass are not added to the routing table.