3com S7906E Guide De Référence

 

1-25 

# Filter received routes using the IPv6 prefix list abc.  

<Sysname> system-view 

[Sysname] ip ipv6-prefix abc permit 2002:1:: 64 

[Sysname] ospfv3 1 

[Sysname-ospfv3-1] filter-policy ipv6-prefix abc import 

import-route { isisv6 process-id | ospfv3 process-id | ripng process-id | bgp4+ [ allow-ibgp ] | direct 

| static } [ cost value | type type | route-policy route-policy-name ] * 

undo import-route { isisv6 process-id | ospfv3 process-id | ripng process-id | bgp4+ | direct | static } 

import-route  protocol  [  process-id  |  allow-ibgp ] [ cost  cost  |  type  type | route-policy 

route-policy-name ] * 

undo import-route protocol [ process-id ] 

OSPFv3 view 

2: System level 

protocol: Redistributes routes from a specified routing protocol, which can be bgp4+, direct, isisv6, 

ospf v3, ripng, or static.  

process-id: Process ID of the routing protocol, in the range 1 to 65536. It defaults to 1. This argument 

takes effect only when the protocol is isisv6, ospfv3, or ripng.  

allow-ibgp: Allows redistributing iBGP routes. This keyword takes effect only the protocol is bgp4+.  

cost cost: Specifies a cost for redistributed routes, ranging from 1 to 16777214. The default is 1.  

type type: Specifies the type for redistributed routes, 1 or 2. It defaults to 2. 

route-policy route-policy-name: Specifies to redistribute only the routes that match the specified route 

policy. route-policy-name is a string of 1 to 19 characters. 

 

Using the import-route bgp4+ command redistributes only EBGP routes, while using the import-route 

bgp4+ allow-ibgp command redistributes both EBGP and IBGP routes. 

 

Use the import-route command to redistribute routes. 

Use the undo import-route command to disable routes redistribution.