Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-26 
IPv6 OSPFv3 does not redistribute routes from other protocols by default. 
Examples 
# Configure to redistribute routes from RIPng and specify the type as type 2 and cost as 50.  
<Sysname> system-view 
[Sysname] ospfv3 
[Sysname-ospfv3-1] import-route ripng 10 type 2 cost 50 
# Configure OSPFv3 process 100 to redistribute the routes found by OSPFv3 process 160.  
<Sysname> system-view 
[Sysname] ospfv3 100 
[Sysname-ospfv3-100] import-route ospfv3 160 
log-peer-change 
Syntax 
log-peer-change 
undo log-peer-change 
View 
OSPFv3 view 
Default Level 
2: System level 
Parameters 
None 
Description 
Use the log-peer-change command to enable the logging on neighbor state changes. 
Use the undo maximum load-balancing command to disable the logging. 
With this feature enabled, information about neighbor state changes of the current OSPFv3 process will 
display on the configuration terminal. 
Examples 
# Disable the logging on neighbor state changes of OSPFv3 process 100.  
<Sysname> system-view 
[Sysname] ospfv3 100 
[Sysname-ospfv3-100] undo log-peer-change 
maximum load-balancing (OSPFv3 view) 
Syntax 
maximum load-balancing maximum 
undo maximum load-balancing