Sony rdr-gx210 Manuel D’Utilisation
80
The picture from equipment connected to the
recorder’s input jack does not appear on the
screen.
recorder’s input jack does not appear on the
screen.
, If the equipment is connected to the LINE 1-TV
jack, select “LINE 1” in the front panel display
by pressing INPUT SELECT.
If the equipment is connected to the LINE 2 IN
jacks, select “LINE 2” in the front panel display
by pressing INPUT SELECT.
If the equipment is connected to the LINE 4 IN
jacks, select “LINE 4” in the front panel display
by pressing INPUT SELECT.
If the equipment is connected to the LINE 3/
DECODER jack, select “LINE 3” in the front
panel display by pressing INPUT SELECT.
If the equipment is connected to the DV IN jack,
(this is usually for a digital video camera
connection), select “DV” in the front panel
display by pressing INPUT SELECT.
by pressing INPUT SELECT.
If the equipment is connected to the LINE 2 IN
jacks, select “LINE 2” in the front panel display
by pressing INPUT SELECT.
If the equipment is connected to the LINE 4 IN
jacks, select “LINE 4” in the front panel display
by pressing INPUT SELECT.
If the equipment is connected to the LINE 3/
DECODER jack, select “LINE 3” in the front
panel display by pressing INPUT SELECT.
If the equipment is connected to the DV IN jack,
(this is usually for a digital video camera
connection), select “DV” in the front panel
display by pressing INPUT SELECT.
The playback picture or TV programme from
the equipment connected through the recorder
is distorted.
the equipment connected through the recorder
is distorted.
, If the playback picture output from a DVD
player, VCR, or tuner goes through your recorder
before reaching your TV, the copy-protection
signal applied to some programmes could affect
picture quality. Disconnect the playback
equipment in question and connect it directly to
your TV.
before reaching your TV, the copy-protection
signal applied to some programmes could affect
picture quality. Disconnect the playback
equipment in question and connect it directly to
your TV.
The picture does not fill the screen.
, Set [TV Aspect] in [Settings] Setup in
accordance with the aspect ratio of your TV
(page 72).
(page 72).
The picture does not fill the screen, even
though the aspect ratio is set in [TV Aspect] in
[Settings] Setup.
though the aspect ratio is set in [TV Aspect] in
[Settings] Setup.
, The aspect ratio of the disc is fixed on your DVD.
The picture is black and white.
, If you are using a SCART cord, be sure to use
one that is fully wired (21 pins).
Sound
There is no sound.
, Re-connect all connections securely.
, The connecting cord is damaged.
, The input source setting on the amplifier or the
, The connecting cord is damaged.
, The input source setting on the amplifier or the
connection to the amplifier is incorrect.
, The recorder is in reverse play, fast forward,
slow motion, or pause mode.
, If the audio signal does not come through the
Sound is noisy.
, When playing a CD with DTS sound tracks,
noise will come from the LINE 2 OUT (AUDIO
L/R) jacks, LINE 1-TV jack, or LINE 3/
DECODER jack (page 51).
L/R) jacks, LINE 1-TV jack, or LINE 3/
DECODER jack (page 51).
The sound volume is low.
, The sound volume is low on some DVDs.
An alternate audio track cannot be recorded or
played.
played.
, If an audio channel other than “Main+Sub” is
selected, you cannot record both main and sub
sounds. Check the selected audio channel before
you start recording.
sounds. Check the selected audio channel before
you start recording.
, If you have connected an AV amplifier to the
DIGITAL OUT (OPTICAL or COAXIAL) jack
and want to change the audio track during
playback, set [Dolby Digital] in [Audio] Setup to
[D-PCM] (page 74).
and want to change the audio track during
playback, set [Dolby Digital] in [Audio] Setup to
[D-PCM] (page 74).
Playback
The disc does not play.
, The disc is upside down. Insert the disc with the
playback side facing down.
, The disc is not correctly inserted.
, Moisture has condensed inside the recorder.
, Moisture has condensed inside the recorder.
Remove the disc and leave the recorder turned on
for about half an hour until the moisture
evaporates.
for about half an hour until the moisture
evaporates.
, If the disc was recorded on another recorder, the
recorder cannot play the disc if it was not
finalized (page 35).
finalized (page 35).
The disc does not start playback from the
beginning.
beginning.
, Resume play was activated (page 48).
, You have inserted a disc whose Title menu or
, You have inserted a disc whose Title menu or
DVD menu automatically appears on the TV
screen when it is first inserted. Use the menu to
start playback.
screen when it is first inserted. Use the menu to
start playback.