TransCore 05716 Manuel D’Utilisation
8-3
Chapter 8
Configuring the Multiprotocol Rail Reader
This chapter provides instructions for configuring the Multiprotocol Rail
Reader (MPRR), including factory configuration parameter defaults and
instructions for using terminal emulation software to check and change
the MPRR factory configuration defaults.
Reader (MPRR), including factory configuration parameter defaults and
instructions for using terminal emulation software to check and change
the MPRR factory configuration defaults.
Configuring the Reader
After installing the MPRR, you need to configure its operating parameters. Terminal
settings should be initially set at 9600 baud, 8 data bits, no parity, 1 stop bit, and no
flow control.
settings should be initially set at 9600 baud, 8 data bits, no parity, 1 stop bit, and no
flow control.
General Configuration Labeling
Each MPRR and its shipping carton are labeled to indicate the unit’s general configu-
ration.
ration.
Table 8-1 MPRR Configuration Label Fields
Field
Description
1st
TransCore reader designator (10-)
2nd
Model number
To be provided in the final version of the guide (7032-)
To be provided in the final version of the guide (7032-)
3rd
Interface
To be provided in the final version of the guide (TBD-)
To be provided in the final version of the guide (TBD-)
4th
To be provided in the final version of the guide (TBD-)