GatesAir Inc. UAXFLID Manuel D’Utilisation
2-8
888-2721-001
10/6/10
WARNING: Disconnect primary power prior to servicing.
Section 2 Installation / Initial Turn-On
Maxiva UAX Transmitter Indoor System
User Manual
2.6
AC Distribution Panel
!
CAUTION:
ALL CONNECTIONS LISTED IN THIS SECTION SHOULD BE VERIFIED WITH THE
SCHEMATICS BEFORE INITIAL TURN ON.
SCHEMATICS BEFORE INITIAL TURN ON.
!
CAUTION:
THE USE OF A SYSTEM SURGE SUPPRESSOR IS RECOMMENDED. THE SYSTEM
SURGE SUPPRESSOR WILL BE PROVIDED BY THE CUSTOMER.
SURGE SUPPRESSOR WILL BE PROVIDED BY THE CUSTOMER.
Figure 2-6 Transmitter AC Distribution Panel
Figure 2-6 shows the AC distribution panel. LPU, TCU and PAB power can be
controlled from this panel. It is located at the top of the transmitter in the front.
controlled from this panel. It is located at the top of the transmitter in the front.
STEP 1
Verify all circuit breakers on the AC distribution panel in the
transmitter cabinet are OFF.
STEP 2
Verify that the AC mains are disabled before proceeding.
STEP 3
Connect a safety ground cable from the ground connector shown in
Figure 2-4 to the AC mains ground.
STEP 4
Following all local codes hook up the 208-240 and 120VAC mains.