Tyco Safety Products/Sensormatic AMS9050 Manuel D’Utilisation
Preliminary
Mounting the Controller
WARNING!
Do not mount controller with
its fan or cable tray face up.
The controller can be mounted as follows:
- On a shelf.
- On a wall. DO NOT mount the controller with its
- On a wall. DO NOT mount the controller with its
fan facing up!
- To a ceiling. Plywood with a surface larger than
the controller is secured to the ceiling studs that
hold the drywall. The controller then attaches
with suitable hardware to the plywood.
hold the drywall. The controller then attaches
with suitable hardware to the plywood.
Equipment Required
Basic setup requires the following equipment:
• AMS-9050 controller
• Pedestal antennas
• Hard tag (non-deactivateable Ultra•Max tag)
• Ultra•Max low energy labels.
• AMS-9050 controller
• Pedestal antennas
• Hard tag (non-deactivateable Ultra•Max tag)
• Ultra•Max low energy labels.
Advanced setup requires the following additional
equipment:
• Laptop
equipment:
• Laptop
with
Windows
®
95, 98, NT, 2000, or XP
operating software
• RS-232 Ultra•Max programming cable
• ADS 4 service configurator software.
• ADS 4 service configurator software.
People with Implanted Medical Devices
Although this anti-theft system meets standards for
interaction with implanted medical devices, place
the system in such a way that customers:
- do not linger near or lean on its antenna(s)
interaction with implanted medical devices, place
the system in such a way that customers:
- do not linger near or lean on its antenna(s)
while making their purchase
- are only directly in front of the antenna(s) while
exiting the checkout area.
!!
AMC-7000 INTEGRATED METAL Foil DETECTION
8200-2609-01, REV. 3a
INSTALLATION GUIDE
10 OF 31