Baicells Technologies Co. Ltd. BRU3510 Manuel D’Utilisation
10
2.3.4 Grounding and Lightning Protection
BRU3510 base station built-in lightning protection function. When the base station is
installed, connect the grounding wire to ground, that is, connecting yellow-green ground
wire to GND terminal of base station with screw. After installation, you should make some
anti-corrosion and anti-rust measures, such as welding on tin. And the ground wire
connects to the ground point. The ground wire is not smaller than 16 mm
2
, as short as
possible, do not coil round. Figure 2-1 shows the grounding.
Figure 2-1 Grounding and Lightning Protection