Whirlpool SS385PEE Manuel D’Utilisation

11

After the countdown is over, 3 short tones
will sound, followed by one tone that sounds
every 6 seconds until you press any other
command pad.

Press Timer On/Off pad for about 4 seconds
until TIMER stops flashing on the display.

The Off/Cancel pad will cancel any function
except for the Timer function. When you
press the Off/Cancel pad, the display will
show the time of day or, if Minute Timer is
also being used, the time remaining.

Audible signals tell you if a function is
entered correctly or not. They also tell you
when a cycle is completed.

To shut off repeating end of timer
countdown signal:
1. Press and hold the Off/Cancel pad for

10 seconds.

2. A short tone will sound to tell you the

signal has been changed.

Repeat Steps 1 and 2 above to turn the
signal back on.