FieldServer FS-8700-64 Manuale Utente
FS-8700-64
ATMI
ACM
Page
6
of
22
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Example
The following FieldServer settings are suitable for default ACM settings.
The following FieldServer settings are suitable for default ACM settings.
// Client Side Connections
Connections
Port, Baud, Parity, Protocol, Handshaking, Poll_Delay
P8, 9600, None, ATMI , None, 0.100s
Connections
Port, Baud, Parity, Protocol, Handshaking, Poll_Delay
P8, 9600, None, ATMI , None, 0.100s
4.3 Client Side Nodes
Section Title
Nodes
Column Title
Function
Legal Values
Node_Name
Provide name for node
Up to 32 alphanumeric
characters
characters
Node_ID
ACM units do not have a
node ID contained in the
serial data. This field s not
used in the ATMI ACM
driver.
node ID contained in the
serial data. This field s not
used in the ATMI ACM
driver.
Protocol
Specify protocol used
ATMI
Port
Specify which port the
device is connected to the
FieldServer
device is connected to the
FieldServer
P1-P8, R1-R2
Example
// Client Side Nodes
Nodes
Node_Name, Protocol, Port
ACM-1 , ATMI , P8
Nodes
Node_Name, Protocol, Port
ACM-1 , ATMI , P8
4.4 Client Side Map Descriptors
4.4.1 FieldServer Specific Map Descriptor Parameters
Column Title
Function
Legal Values
Map_Descriptor_Name
Name of this Map Descriptor Up to 32 alphanumeric
characters
Data_Array_Name
Name of Data Array where
data is to be stored in the
FieldServer
data is to be stored in the
FieldServer
One of the Data Array
names from “Data Array”
section above
names from “Data Array”
section above
Data_Array_Location
Starting location in Data
Array
Array
0 to maximum specified in
“Data Array” section above
“Data Array” section above
Function
Function of Client Map
Descriptor
Descriptor
PASSIVE