Insys MoRoS ISDN 1.1.1 11-02-06-02-01.005 Manuale Utente

Functions 

MoRoS Modem/ISDN 

34

 

 

June 06

 

As the writing of the update may take up to one minute, the values for the “Idle time” 
should read "0", because no data is transmitted during the writing process. The system 
update will be performed on the remote MoRoS despite a terminated connection. Any 
possible messages regarding the success or failure will not be displayed. 

If an error took place during the overwriting of the old system, the update procedure 
may be repeated.  

   In no case may the MoRoS perform a restart during an update procedure or 

after a failed update! If the reset key is pressed or a voltage failure occurs, 
the MoRoS will have no valid system and the device will not be able to start!  

A restart of the MoRoS will load the new system. Before a restart is performed, it may be 
possible that the basic settings need to be restored first. This information can be taken 
from the text file, which is supplied together with the update file. 

 

This field has information regarding the currently running system. These system data as 
well as the set IP address should be available if you want to contact the INSYS support. 

This field also displays the messages regarding the last ten connections. A successful 
connection setup will be recorded with “CONNECT”. If a connection setup was 
unsuccessful, the reason why the connection could not be established will be recorded.