Garmin 530 Guida Utente

136

9 - aux pages

Flight Planning Page: Crossﬁ ll

Select “Crossﬁ ll?” from the Default NAV Page or Flight Plan Page by pressing MENU or while on the

Flight Planning Page by scrolling down to “Crossﬁ ll” and pressing ENT.

Automatic Operation: If both units are set to automatic, a change in the active ﬂ ight plan on one unit

can also be seen in the other. Initiating a direct-to to a waypoint on one unit also initiates a direct-to to the
same waypoint on the other unit.

If one unit is set for automatic crossﬁ ll and the other is set for manual crossﬁ ll, then only the auto unit

automatically sends data to the manual unit. In this conﬁ guration, the auto unit could be thought of as the
master unit.

Manual Operation: If manual operation is desired, the pilot must invoke all transfers from that unit.

When a unit is conﬁ gured for automatic transfer, a manual transfer can also be done on com mand. If
either of the messages “data transfer error” or “data transfer cancelled” are received during an automatic or
manual transfer, the pilot must force another transfer.

To transfer ﬂ ight plans or user waypoints to/from a second 500-Series (or 400-Series) unit:

1. Select “Crossﬁ ll” from the Flight Planning Page, using the steps described on page 130.

2. The ﬂ ashing cursor highlights the method ﬁ eld. Rotate the small right knob to select “Auto” or “Manual”.

“Auto” automatically transfers any selection of (or any change to) a direct-to destination or active ﬂ ight plan
to a second 500/400-Series Garmin unit.

{continued}

You can select the “Crossﬁ ll?” option from the
Default NAV Page or the Flight Plan Catalog, as
well as from the Flight Planning Page.

Crossﬁ ll method can be set to “Auto” or “Manual”.
“Auto” automatically transfers direct-to or active
ﬂ ight plan selections between units.

Flight Planning

113-188.indd 136

4/11/2003, 9:05:57 AM