Garmin 530 Guida Utente
137
137
9 - aux pages
Flight Planning Page: Crossfi ll (cont.)
3. The fl ashing cursor highlights the transfer data option (TRANSFER) fi eld. Rotate the small right knob to
display a window of available data options:
• Active Flight Plan — transfers the active fl ight plan to/from a second 500-Series (or 400-Series)
Garmin unit in a dual unit installation. This option is the default when selecting “Crossfi ll” from the
Flight Planning Page. Active Flight Plan information is
automatically trans ferred between units when the “Auto” method is selected above.
Flight Planning Page. Active Flight Plan information is
automatically trans ferred between units when the “Auto” method is selected above.
• Flight Plan — transfers any stored fl ight plan to/from a second 500-Series (or 400-Series) unit, by
selecting the fl ight plan by number. This option is the default when selecting “Crossfi ll” from the
Flight Plan Catalog. See page 53.
Flight Plan Catalog. See page 53.
• User Waypoints (all) — transfers all stored user waypoints to/from a second 500/400-Series unit.
• User Waypoint — transfers the specifi ed user waypoint to a second 500/400-Series unit.
• User Waypoint — transfers the specifi ed user waypoint to a second 500/400-Series unit.
4. Continue rotating the small right knob to select the desired data option. Press ENT when fi nished.
5a. For a stored fl ight plan (“Flight Plan” data option), the fl ight plan number fi eld is highlighted. Rotate the
small right knob to select the desired fl ight plan and press ENT.OR,
5b. For a specifi ed user waypoint (“User Waypoint” data option), the waypoint identifi er fi eld is high light ed. Use the
small and large right knobs to enter the identifi er of the desired user waypoint. Press ENT when fi nished.
6. The fl ashing cursor moves to the “CROSS-SIDE” fi eld. Rotate the small right knob to select “To” or “From”
and press ENT.
7. The fl ashing cursor moves to the “Initiate Transfer?” confi rmation fi eld. Press ENT to transfer the selected data.
STEP 2: From the METHOD fi eld, rotate the
small right knob to select “Auto” or “Manual”.
“Auto” automatically transfers direct-to or active
fl ight plan selections between units.
small right knob to select “Auto” or “Manual”.
“Auto” automatically transfers direct-to or active
fl ight plan selections between units.
STEP 3: Rotate the small right knob to display a
list of TRANSFER options. Continue rotating the
small right knob to select the desired option.
list of TRANSFER options. Continue rotating the
small right knob to select the desired option.
Flight Planning
113-188.indd 137
4/11/2003, 9:05:58 AM