Garmin 530 Guida Utente
69
69
5 - procedures
8. Just prior to crossing BODRY intersec-
tion, an alert — ”HOLD TEARDROP”
— appears in the lower right corner of
the screen to suggest the proper holding
pattern entry. (“HOLD DIRECT” or “HOLD
PARALLEL” may be offered on other simi-
lar ap proach es.)
— appears in the lower right corner of
the screen to suggest the proper holding
pattern entry. (“HOLD DIRECT” or “HOLD
PARALLEL” may be offered on other simi-
lar ap proach es.)
9. As mentioned in the missed approach
example, the Default NAV Page displays a
timer during the holding pattern. Use this
timer to fl y the one minute outbound por-
tion of the holding pattern. (The holding
pattern is displayed on the Map Page and
indicated as the active leg on the Default
NAV and Active Flight Plan pages.)
timer during the holding pattern. Use this
timer to fl y the one minute outbound por-
tion of the holding pattern. (The holding
pattern is displayed on the Map Page and
indicated as the active leg on the Default
NAV and Active Flight Plan pages.)
10. When crossing the IAF, “SUSP” appears
above the OBS key, indicating
that automatic sequencing of approach waypoints is tem po rari ly sus pend ed. As you make the turn inbound, “SUSP” is
cancelled and the GNS 530 returns to automatic sequencing.
cancelled and the GNS 530 returns to automatic sequencing.
NOTE: If you need to lose extra altitude or speed by going around the holding pattern again, press
OBS to manually suspend waypoint sequencing BEFORE crossing the holding waypoint the second
time. If you’ve already passed this waypoint, re-activate the holding pattern using the shortcut
steps described on page 60.
OBS to manually suspend waypoint sequencing BEFORE crossing the holding waypoint the second
time. If you’ve already passed this waypoint, re-activate the holding pattern using the shortcut
steps described on page 60.
11. As you approach BODRY intersection from within the holding pattern, a waypoint alert (”NEXT DTK 209°”)
appears in the lower right corner of the screen.
{continued}
STEP 9: While fl ying the holding pattern, a timer
appears on the Default NAV Page. Use the timer to
fl y the one minute outbound portion of the pattern.
appears on the Default NAV Page. Use the timer to
fl y the one minute outbound portion of the pattern.
STEP 10: When crossing the IAF, “SUSP” appears
above the OBS key to alert you that automatic
waypoint sequencing is temporarily suspended.
above the OBS key to alert you that automatic
waypoint sequencing is temporarily suspended.
Approach with Hold
)
t
uvw
DO NOT USE FOR
NAVIGATION
61-112.indd 69
4/11/2003, 8:52:20 AM