Xerox FreeFlow Makeready Support & Software Guida Dell'Amministratore
FreeFlow
Configuring Nuvera Scan Back and IQI Enhancement
System Administration Guide
B-3
k.
Select [OK] to add the user to the DocuSP controller.
l.
Enter [exit] and press [Return]. This logs out the root account.
m. From the Admintool menu bar, select [File: Exit]. The terminal window regains focus.
n.
Enter [exit] and press [Return] again to close the terminal window.
o.
Proceed to the next section,
Create a Scan Back save location on the FreeFlow system
Complete the following steps on the FreeFlow system to create a Network Agent Save
Location:
Location:
1.
From the Windows Taskbar, select [Start: Programs: Xerox FreeFlow Software: Printer
Administration: Network Agent]. The Network Agent Setup screen displays.
Administration: Network Agent]. The Network Agent Setup screen displays.
2.
Select [Add]. The Add/Edit Network Agent screen displays.
3.
Select the radio button for [DocuSP Decomp Service].
4.
In the Printer controller/server text box, enter the network qualified name or IP Address of
the Nuvera DPS or DC/P printer.
the Nuvera DPS or DC/P printer.
5.
In the Queue name text box, enter the name of the queue on the Nuvera DPS or DC/P.
Note
The Nuvera DPS or DC/P has only one queue. The queue name is the controller name
followed by an upper case VP.
followed by an upper case VP.
6.
From the Printer model drop-down list, select [Nuvera 120 DPS or DC/P] or [Nuvera 100
DPS or DC/P].
DPS or DC/P].
7.
From the Print controller/server type drop-down list, select [DocuSP 5.0] or [DocuSP 4.2].
8.
In the User name and Password text boxes, enter the name of the user and password of the
user account created on the Nuvera DPS or DC/P in
user account created on the Nuvera DPS or DC/P in
on page B-2 of this appendix. This account will be used by the FreeFlow
system to connect to the Nuvera DPS or DC/P.
9.
In the Server path text box, enter the path to the scan back directory you created on the
Nuvera DPS or DC/P on page 3 of this appendix as follows:
Nuvera DPS or DC/P on page 3 of this appendix as follows:
/var/spool/XRXnps/saved/freeflow
10. Under [Options], do not mark the [Log Errors] check box unless absolutely necessary.
Note
Marking the check box may result in the generation of erroneous errors on the FreeFlow
system.
system.
11. Under [Save jobs to], browse to and select a location in which to save jobs on the FreeFlow
system. This location is where the jobs will be placed after they are retrieved from the
Nuvera DPS or DC/P.
Nuvera DPS or DC/P.