Cisco Cisco Firepower Management Center 2000 Guida Informativa

Install the shorter M5-0.8mm Philips flat head screws in the top and bottom, but do not tighten 
completely. They should be a bit loose for free play adjustment of the slide rail (see 

Attach the opposite end of the slide rail in the same manner.

You do not need to use a washer when attaching the opposite end of the adapter and slide rail.

With the screws slightly loose, there is some movement between the pieces. Extend the slide rail so that 
both the inner and outer rail extend past the adapter bracket (see 

). Adjust the pieces so that the 

slide moves freely, then tighten the three screws on the front and back of the slide rail.

Repeat this for the other slide rail.

Verify proper screw engagement for the screws going into the rail/vertical mounting bracket.

Complete installation per the square-hole rack mounting instructions.