Cisco Cisco ONS 15454 M2 Multiservice Transport Platform (MSTP)
11
Configuring GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Cards Using PCLI
OL-25022-01
DLP- G522 Apply a Service Instance Policy to a Port on GE_XPE or 10GE_XPE Cards Using PCLI
NTP-G226 Enable MAC Address Learning on SVLANs for GE_XP,
10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
Note
For detailed information on PCLI, see the
document.
Step 1
Complete the
at the node where you want
to enable MAC address learning. If you are already logged in, continue with
Step 2
Complete the following tasks, as needed:
Step 7
exit
Example:
MSTP-176(config-if)# exit
Exits interface configuration mode.
Stop. You have completed this procedure.
—
Purpose
This procedure explains how to enable MAC address learning on GE_XP,
10GE_XP, GE_XPE, or 10GE_XPE cards using PCLI.
10GE_XP, GE_XPE, or 10GE_XPE cards using PCLI.
Tools/Equipment
None
Prerequisite Procedures
Required/As Needed
As needed
Onsite/Remote
Onsite or remote
Security Level
Provisioning or higher
Command or Action
Purpose
Step 1
enable shelf/slot
Example:
MSTP 176# enable 1/12
Selects shelf and slot to be configured for a card.
Step 2
configure terminal
Example:
MSTP 176# configure terminal
Enters global configuration mode.
Step 3
mac-address-table learning vlan
<vlan-id>
Example:
MSTP-176(config)# mac-address-table
learning vlan 2
Enables interface based learning of MAC address. Repeat the
command on each SVLAN to enable MAC address learning.
command on each SVLAN to enable MAC address learning.
Command or Action
Purpose