Cisco Cisco ONS 15454 M2 Multiservice Transport Platform (MSTP)
13
Configuring GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Cards Using PCLI
OL-25022-01
DLP- G522 Apply a Service Instance Policy to a Port on GE_XPE or 10GE_XPE Cards Using PCLI
NTP-G225 Provision SVLAN Rate Limiting on the GE_XP,
10GE_XP, GE_XPE, or 10GE_XPE Card Using PCLI
10GE_XP, GE_XPE, or 10GE_XPE Card Using PCLI
Note
For detailed information on PCLI, see the
document.
Step 1
Complete the
at the node where you want
to provision SVLAN rate limiting. If you are already logged in, continue with
Step 2
Complete the following tasks, as needed:
Step 3
link integrity
Example:
MSTP 176 (config-profile) link
integrity
Enables link integrity.
Step 4
exit
Example:
MSTP-176(config-profile)# exit
Exits VLAN profile configuration mode.
Step 5
vlan profile name vlan svlanid
interface type port
Example:
MSTP 176 (config)# vlan profile a vlan
2 interface gigabitethernet 2
Associates the SVLAN profile to a SVLAN on a port.
Step 6
interface type port
Example:
MSTP 176 (config)# interface
gigabitethernet 2
Enters interface configuration mode.
Step 7
link integrity action {none | squelch |
propagate}
Example:
MSTP 176 (config-if)# link integrity
action squelch
When an AIS packet is received on a SVLAN terminating on the UNI
port, the UNI port is squelched.
port, the UNI port is squelched.
Step 8
exit
Example:
MSTP-176(config-profile)# exit
Exits interface configuration mode.
Step 9
Return to your originating procedure (NTP). —
Command or Action
Purpose