HP designjet l65500 Manuale Di Servizio
Moving the Printer
818
Move the printer
14.
Ensure the path switch is in the horizontal position.
15.
Turn On the Flushing Tool with the switch located on top.
The Cleaning Tool slowly pumps the distilled water into the tubes and ink system of the color you are cleaning.
The Cleaning Tool slowly pumps the distilled water into the tubes and ink system of the color you are cleaning.
The pumping action cleans ink out of the tubes and into the draining bottle.
16.
When the level of distilled water is half finished:
a.
Install the New Empty Intermediate Flushing Tank (that came
with the flushing kit) into the Left Intermediate slot, wait 10 sec-
onds for the ink to be cleaned from this area and then remove
the tank.
b.
Install the Intermediate Flushing Tank into the Right Intermedi-
ate slot, wait 10 seconds for the ink to be cleaned from this area
and then remove the tank.
17.
When the Ink system has been cleaned of ink and the Flushing tool becomes empty of water, the pump of the
Cleaning Tool will then push air into the ink system tubes, which will push the water out into the draining
bottle of the Quick Connector Flushing Tool, this process will last for approximately 5 minutes.
18.
When five minutes has past:
a.
Install the Intermediate Flushing Tank (that came with the flush-
ing kit) into the Left Intermediate slot, wait 10 seconds for the
water to be removed from this area and then remove the tank.
b.
Install the Intermediate Flushing Tank into the Right Intermedi-
ate slot, wait 10 seconds for the water to be removed from this
area and then remove the tank.
19.
When the Ink system has been cleaned of ink and the
Flushing tool becomes empty of water, the pump of the
Cleaning Tool will then push air into the ink system tubes, which
will push the water out into the draining bottle of the Quick Connector Flushing Tool, this process will last for
approximately 5 minutes.
NOTE:
If the distilled water in the Cleaning
Tool bottle becomes low before the ink system
has been cleaned of ink, you must refill the
bottle with more water. You must stop the
Flushing tool to add more water.