HP designjet l65500 Manuale Di Servizio
Tr
ou
bles
hooting
Troubleshooting
193
In the three photos shown here, we can see what the material on the printhead cleaner mechanism
should look like when a hard recovery has been done (from the IPS) and the printheads and their
primer assembly are working correctly:
If the primer is not functioning, the material will only have the marks from the printhead spitting,
there will be no saturation of the ink.
To solve an error with the primer try the following procedure:
1.
Trigger a Printhead replacement via the Front Panel.
2.
Open the Printhead latch of the printhead color that is not priming.
3.
Close again the latch. We recommend a little oil or grease (or simple wetting) both o-
rings to improve the seal once the printhead is engaged.
Picture 1: Black/Cyan Printhead latch in the open position