HP designjet l65500 Manuale Di Servizio

238

Troubleshooting

1.

To start color calibration from the HP Internal Print Server, select Substrate > Color calibration, 
then click the Calibrate button.

•

The print is scanned automatically to calibrate the Color Sensor.

The Nozzle Health diagnostic plot will show the status of each printhead. 

1.

Go to the HP Internal Print Server and select Printer > Printhead cleaning.

2.

Press the Print button in the same window to print the following display. 

The print consists of six rectangles, one for each color. Each rectangle consists of small dashes. Any single 

dash uses few nozzles in the same way the user images are printed. This makes the printer robust to any 

failed nozzle and in this case, the image quality would not to be affected. The print uses the 4 passes 

printmode.

•

Each color is printed by a single printhead and shows the performance of that printhead.

The calibration process is fully automatic and can be performed unattended after you 

have loaded substrate of the type you wish to calibrate. The process takes about 25 minutes 

and consists of the following steps.