HP designjet l65500 Manuale
to the printheads, the carriage cover may need to be cleaned about once every two months, depending
on your use of the printer. An alert is displayed when the cover needs to be cleaned.
on your use of the printer. An alert is displayed when the cover needs to be cleaned.
1.
Go to the front panel and select Clean carriage cover from the Preventive Maintenance menu
. The carriage moves into the electrical compartment.
2.
Open the printhead access door.
3.
Press the
OK
key on the front panel.
4.
Clean the carriage cover with a lint-free cloth.
5.
If you find dried ink that you cannot remove with the dry cloth, try dampening the cloth with isopropyl
alcohol. After cleaning, wait for the cover to dry.
alcohol. After cleaning, wait for the cover to dry.
6.
Close the door and press the
OK
key on the front panel.
Clean the carriage rails
The rails along which the carriage moves may need to be cleaned about once every two years,
depending on your use of the printer. An alert is displayed when they need to be cleaned.
depending on your use of the printer. An alert is displayed when they need to be cleaned.
1.
Go to the front panel and select Clean carriage rails from the Preventive Maintenance menu
. Press
OK
to continue.
2.
The carriage beam is automatically raised, as when loading substrate.
3.
When the carriage beam has stopped rising, turn off the printer.
ENWW
Clean the carriage rails
13
Hardwa
re ma
int
enance