HP designjet l65500 Manuale

Reach underneath the line sensor and clean it with the cotton swab as shown.

Use a brush to clean accumulated dust from the aerosol inlets. Do not use the brush on any other
parts.

Look for condensation under the carriage, and remove it with a clean lint-free cloth if necessary.

Press the OK button on the front panel. The printer lowers the carriage beam to its normal position.

Do not insert your hands or anything else into the printer while the carriage is

descending.

The main roller should be cleaned whenever it is visibly dirty, or when you notice that substrate advance
is no longer smooth and regular.

Clean the main roller with a clean cloth dampened with water, and make sure that the roller is dry before
printing. Do not use petroleum-based cleaning liquids.

If you sometimes print with very small side margins, ink may accumulate on the substrate edge holders,
which can cause smears on your prints and blocked nozzles in the printheads.

Check the substrate edge holders monthly for dried ink. If necessary, clean them with a lint-free cloth
dampened with isopropyl alcohol.

It is not normally necessary to remove the edge holders from the printer, and doing so may

damage them. When not required, they can simply be pushed to the side, away from the substrate.

ENWW

Clean the main roller

17