HP digital sender 9200c Manuale Di Servizio

If a jam message appears on the control-panel display, follow these instructions to clear jams in the
digital-sender ADF.

Press the release button to open the ADF cover.

Remove any jammed media from this area. Make sure that you have removed all of the pieces of
torn media.

Close the ADF cover.

When clearing jams, be very careful not to tear jammed media. If a small piece of media remains in
the digital sender, it could cause additional jams. If jams are a recurring problem, see 

.

Try the following methods to solve repeated jams in the digital sender:

■

Adjust the guides so that they are snug against the stack but do not bend the stack.

■

The maximum number of pages the ADF can hold is 50 or fewer, depending on the type of
media that is being loaded.

■

The maximum number of pages the output tray can hold is 50 or fewer. Make sure that more
pages are not stacking up in the output tray.

■

The type of media that is being loaded might not meet the required specifications.

■

Clean the separation pad and the rollers. See 

.

■

If the mylar sheet has recently been replaced, verify that it was correctly installed. See the
documentation that came with the mylar sheets.

■

If the roller assembly or separation pad has recently been replaced, verify that it is correctly
installed. See the documentation that came with the replacement part.

166

7 Troubleshooting