blue-seal e1100 Manuale Utente

-24-

Revision 4/F3591

Securing nut

3) Remove the two screws securing the

thermostat phial mounting bracket to the
RH wall of the oven. Feed the thermostat
phial through into the control cavity.

Two screws

1) Open control panel (refer 6.2.1).
2) Remove thermostat knob and unscrew the

nut securing the thermostat to the control
panel.

1) Open the control panel (refer 6.2.1).
2) Disconnect the wires from the faulty

indicator.

3) Press in the locking tabs at sides of the

indicator and from rear push indicator
through front of control panel.

1)  Open the control panel (refer 6.2.1).
2)  Remove the knob from the timer.
3)  Unscrew both screws from the front of the

control panel and remove the timer from
the rear of the control panel.

1)  Open the control panel (refer 6.2.1).
2)  Remove the knob from the timer.
3)  Unscrew the locking nut on the front of the

timer and remove the timer from the rear
of the control panel.

6.3.4 POWER / HEATING INDICATORS

6.3.5 THERMOSTAT

6.3.6 60 MINUTE TIMER

6.3.7 3 HOUR TIMER

4) Replace and reassemble in reverse order.

Figure 6.3.4

Figure 6.3.5

Figure 6.3.6

5) Remove thermostat from oven.
6) Transfer wires to new thermostat.

Reassemble with new thermostat in
reverse order.

4) Transfer wires to the new timer and

reassemble in reverse order.

Figure 6.3.7

3) Press in the locking tabs at top and bottom

of the indicator and from rear push
indicator through front of control panel.

4) Replace and reassemble in reverse order.

Figure 6.3.3

Locking

tabs

Locking

tabs

Thermostat

bulb