Panasonic S-ICX Manuale
Section 521
Built-In ACD Supervisor Guide
S-ICX-10-521 (ACD 3.0)
S-ICX (International) issued February 2000
9
For details on settings see, “Basic Service Flow” .
Operation
The following describes the operation in each of the processes.
EDIT (FF1)
This command resets the current setting of displayed program lines. Edit is
repeated from the specified program line through to the currently registered
final program line (excluding the END/DISC line).
repeated from the specified program line through to the currently registered
final program line (excluding the END/DISC line).
The following screen display shows an example of selection and setting of the
SEARCH command.
SEARCH command.
1. Press
soft keys (1, 2, 3, 6 or 7) for the command to be set, and
press the HOLD key.
Example: Press soft key 3 to select SEARCH.
Example: Press soft key 3 to select SEARCH.
2. Set parameter 1, and press the HOLD key.
Example: Press key 2 to set group 2.
3. Set parameter 2, and press the HOLD key.
Example: Press keys 0, 1 and 5 to set the Search Timer to 15.
6
RET
Program Line
Number Set-
ting 1 to 20
(max. 20
lines)
(must be set)
Number Set-
ting 1 to 20
(max. 20
lines)
(must be set)
Count Set-
ting 1 to 255
(times)
(must be set)
ting 1 to 255
(times)
(must be set)
Return
• Repeats the program from the line number speci-
• Repeats the program from the line number speci-
fied in parameter 1 up to this line for the count
specified in parameter 2.
specified in parameter 2.
No
Com-
mand
mand
Parameter1
Parameter2
Parameter3
Description
SEARCH 1,020,010
03:Select Cmd.
FWD
FWDVM
PLAY
RET
SEARCH
List
→
SEARCH 1
03:AGENT GRP.
AGENT GROUP
NUMBER
(1-3)
List
→
SEARCH 2,020
03:Search Timer
AGENT SEARCH
TIME
1 to 600 sec.
List
→