Garmin Striker 7sv Manuale Proprietario

A magenta line appears. In the center of the magenta line is 

a thinner purple line that represents the corrected course 

from your present location to the destination. The corrected 

course is dynamic, and it moves with your boat when you are 

off course.

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering 

to avoid land, shallow water, and other obstacles.

If you are off course, follow the purple line (corrected course) 

to go to your destination, or steer back to the magenta line 

(direct course).

Select User Data > Routes.

Select a route.

Select Delete.

Select User Data > Manage Data > Clear User Data > 

Routes.

A track is a recording of the current path of your boat. You can 

show your current track in waypoint map view.

Select User Data > Track > Track Options > Track Color.

Select a track color.

Select User Data > Track > Clear Track > OK.

Select User Data > Track > Track Options.

Select Record Mode.

Select an option:
• To record a track log until the track memory is full, select 

Fill.

• To continuously record a track log, replacing the oldest 

track data with new data, select Wrap.

You can indicate the frequency at which the track plot is 

recorded. Recording more frequent plots is more accurate but 

fills the track log faster. The resolution interval is recommended 

for the most efficient use of memory.

Select User Data > Track > Track Options > Record 

Intervals > Interval.

Select an option:
• To record the track based on a distance between points, 

select Distance > Change, and enter the distance.

• To record the track based on a time interval, select Time > 

Change, and enter the time interval.

• To record the track plot based on a variance from your 

course, select Resolution > Change, and enter the 

maximum error allowed from the true course before 

recording a track point.

Select User Data > Manage Data > Clear User Data > All > 

OK.

Select Settings > System.
Display: Adjusts the backlight brightness (

).

GPS: Provides information about the GPS satellite settings and 

fix.

Language: Sets the on-screen language.
Simulator: Turns on the simulator and allows you to set the 

speed and simulated location.

Beeper: Turns on and off the tone that sounds for alarms and 

selections (

Auto Power: Turns on the device automatically when power is 

applied.

System Information: Provides information about the device and 

the software version.

Select Settings > Settings > System Information.
Event Log: Allows you to view a log of system events.
Software Information: Provides information about the device 

and the software version.

Garmin Devices: Provides information about connected Garmin 

devices.

Factory Settings: Restores the device to factory settings.

NOTE: This deletes any setting information you have 

entered.

NOTE: Some settings and options require additional hardware.
Select Settings > My Vessel.
Transducer Type: Displays the type of transducer connected to 

Keel Offset: Offsets the surface reading for the depth of a keel, 

making it possible to measure depth from the bottom of the 

Temp. Offset: Compensates for the water temperature reading 

from a temperature-capable transducer (

).

You can enter a keel offset to compensate the surface reading 

for the depth of a keel, making it possible to measure water 

depth or depth below the keel instead of depth below the 

transducer. Enter a positive number to offset for a keel. You can 

enter a negative number to compensate for a large vessel that 

may draw several feet of water.

Complete an action, based on the location of the transducer:
• If the transducer is installed at the water line 

À

, measure 

the distance from the transducer location to the keel of the 

boat. Enter this value in steps 3 and 4 as a positive 

number to display depth below keel.

• If the transducer is installed at the bottom of the keel 

Á

, 

measure the distance from the transducer to the water 

line. Enter this value in steps 3 and 4 as a negative 

Track

7