ZTE Corporation ZXG-OB06 Manuale Utente
Chapter 4 - System Functions
Confidential and Proprietary Information of ZTE CORPORATION 57
The basic measurement report is shown in Figure 42.
F
I G U R E
4 2
B
A S I C
M
E A S U R E M E N T
R
E P O R T
MS
LAPDm
FURRM
HPIMan
LAPD
BSC
OAMM
Dm _DL_UNIT
DATA _REQ
(M EAS REP)
(M EAS REP)
DL_ DATA_REQ (M EAS RES)
(M EAS RES)
M PH_CHPIndToRR
(CHP M EAS IND)
M PH_RRCm dToCHP
(CHP SET TA)
The OB06 reports the basic wireless measurement results (GSM 05.08
and GSM 05.05) that are generated by the MS and TRX.
This procedure is a default procedure, unless another plan
This procedure is a default procedure, unless another plan
(preprocessing, as described below) is used.
The TRS places these results in the MEAS RES message and reports to
The TRS places these results in the MEAS RES message and reports to
the BSC. The sending of this message is synchronous with the
receiving of the SACCH block from the MS. If this uplink SACCH block
receiving of the SACCH block from the MS. If this uplink SACCH block
does not contain the measurement report that is from the MS (in case
of short messages, for example), the MEAS RES that is sent by the
OB06 will indicate this.
The procedure of measurement report preprocessing is shown in Figure
43.
of short messages, for example), the MEAS RES that is sent by the
OB06 will indicate this.
The procedure of measurement report preprocessing is shown in Figure
43.
F
I G U R E
4 3
M
E A S U R E M E N T
R
E P O R T
P
R E P R O C E S S I N G
MS
LAPDm
FURRM
HPIMan
LAPD
BSC
OAMM
Dm _DL_UNIT
DATA _REQ
(M EAS REP)
(M EAS REP)
DL _DATA_ REQ (PREPROC
M EAS RES)
(PREPROC
M EAS RES)
M PH_CHPIndToRR
(CHP M EAS IND)
(CHP SET TA)
The OB06 first preprocesses the MS measurement report, and then
sends it together with the OB06 measurement result to the BSC
sends it together with the OB06 measurement result to the BSC
through the PREPROC MEAS RES message.