Honeywell International Inc. CS19A Manuale Utente

13 - 1

Repairs and/or upgrades are not to be performed on this product.  These ser-

vices are to be performed only by an authorized service center (see 

Your device provides reliable and efficient operation with a minimum of care.  
Although specific maintenance is not required, the following periodic checks 
ensure dependable operation:

Reading performance may degrade if the scanner’s window is not clean.  If 
the window is visibly dirty, or if the scanner isn’t operating well, clean the 
window with a soft cloth or lens tissue dampened with water (or a mild 
detergent- water solution).  If a detergent solution is used, rinse with a 
clean lens tissue dampened with water only.

The scanner and base’s housing may also be cleaned the same way.

Inspect the interface cable and connector for wear or other signs of dam-
age.  A badly worn cable or damaged connector may interfere with scanner 
operation.  Contact your distributor for information about cable replace-
ment.  Cable replacement instructions are on 

The standard interface cable is attached to the scanner with an 10-pin modular 
connector.  When properly seated, the connector is held in the scanner’s handle 
by a flexible retention tab.  The interface cable is designed to be field replace-

able.

!

Preliminary Draft