Honeywell International Inc. CS19A Manuale Utente

Pagina di 294
3 - 3
Linking Process
Once a scanner is placed into the base, the scanner’s battery charge status 
is checked, and software automatically detects the scanner and links it to 
the base depending on the selected link mode.
Scanner Is Out of Range
The cordless scanner is in communication with its base, even when it is not 
transmitting bar code data.  Whenever the scanner can’t communicate with 
the base for a few seconds, it is out of range.  If the scanner is out of range 
and you scan a bar code, the scanner issues an error tone indicating no 
communication with the base.  In addition, your scanner and base can 
sound an alarm if programmed to emit an alarm.  Refer to 
Scanner Is Moved Back Into Range
The scanner re-links if the scanner or the base have been reset or the 
scanner comes back into range.  If the scanner re-links, you will hear a sin-
gle chirp when the re-linking process (uploading of the parameter table) is 
complete. 
Out of Range and Back into Range 
with Batch Mode On
The scanner may store a number of symbols (approximately 500 U.P.C. 
symbols; others may vary) when out of range and then send them to the 
base when back in range (see 
You will not hear a communication error tone in this mode, but you will hear 
a short buzz when you pull the trigger if the radio communication is not 
working.  Once the radio connection is made, the scanner produces a 
series of beeps while the data is being transferred to the base.
Page Button
When you press the Page button on the base, the scanners associated with 
that base will begin beeping (3 short and 1 long beep).  If you pull the trig-
ger on a scanner that is beeping in response, that scanner will stop beep-
ing.  If you press the Page button on the base a second time, all associated 
scanners will stop beeping.  See 
on page 3-8 for further information 
about Page Button settings. 
About the Battery
There is a danger of explosion if the batteries are incorrectly replaced.  
Replace the batteries with only the same or equivalent type recom-
mended by the manufacturer.  Dispose of used batteries according to 
the recycle program for batteries as directed by the governing agency 
for the country where the batteries are to be discarded.
!
Preliminary Draft