HID Global Corporation 535Y Manuale Utente
_____________________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (714) 598-1600 (800) 237-7769 FAX (714) 598-1690
Web page, E-mail - www.hidcorp.com - ProxPro Plus Wiegand Reader Installation Manual 6030-900 REV G 3 of 10
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (714) 598-1600 (800) 237-7769 FAX (714) 598-1690
Web page, E-mail - www.hidcorp.com - ProxPro Plus Wiegand Reader Installation Manual 6030-900 REV G 3 of 10
ProxPro Plus System Overview
The ProxPro Plus reader is a self contained proximity reader. This product is derived from the popular ProxPro
Reader with added features that include a side cable exit for glass mount locations, and a longer read range.
Reader with added features that include a side cable exit for glass mount locations, and a longer read range.
The two piece polycarbonate enclosure has a cable grommet that seals the cable for the side exit option and a feed
through strain relief connector for the rear exit option. A bi-color LED and beeper enhance user feedback.
Configurable open collector data outputs provide the Wiegand data to the Host. An internal DIP switch makes the
configuration of the outputs, beeper and LED control options simple. Installation of the ProxPro Plus Reader
consists of running cable, making wire connections, verifying the DIP switch settings and mounting.
through strain relief connector for the rear exit option. A bi-color LED and beeper enhance user feedback.
Configurable open collector data outputs provide the Wiegand data to the Host. An internal DIP switch makes the
configuration of the outputs, beeper and LED control options simple. Installation of the ProxPro Plus Reader
consists of running cable, making wire connections, verifying the DIP switch settings and mounting.
Operation
Access Cards (badges, tags, transponders) are presented to the front or back of the ProxPro Plus reader. The
LED is red when the reader is ready to read an access card. The LED turns green and the beeper sounds when the
access card is read and the message is transmitted to the Host computer or interface panel. The system is ready
for another access card as soon as the LED returns to red. There is an anti-pass-back delay of about one second
before it will read the same card. The LED flash is a ¼ of a second long. The operation of the LED and beeper may
be controlled by the Host. If Host controlled, the operation will depend on the programmed timing of the Host.
LED is red when the reader is ready to read an access card. The LED turns green and the beeper sounds when the
access card is read and the message is transmitted to the Host computer or interface panel. The system is ready
for another access card as soon as the LED returns to red. There is an anti-pass-back delay of about one second
before it will read the same card. The LED flash is a ¼ of a second long. The operation of the LED and beeper may
be controlled by the Host. If Host controlled, the operation will depend on the programmed timing of the Host.
Product Configuration/Ordering Options
6030/8 A X X XX - XXXX Y
Customer Custom Artwork or Firmware Number
1 through 9, A through Z
1 through 9, A through Z
Customer Custom Number
Configuration Options - (00 standard)
Hardware Options - N = None
S = Side Exit
R = Rear Exit
R = Rear Exit
Color - G = Gray
Model Number Suffix
Model Number 6030 = ProxPro Plus Wiegand, Reader 6038=ProxPro Plus
Clock and Data Reader
Clock and Data Reader
6030-300-XX
Final Assembly Number – Changes with revisions
!
Standard Wiegand Part Number = 6030AGS00 is a ProxPro Plus, Wiegand, Gray, Side cable exit.