Honeywell International Inc. 8DL5821-1 Manuale Utente
ÊK9947V3ÈŠ
K9947V3 5/08 Rev. A
SPECIFICATIONS
Power: 3V lithium battery
(Duracell DL123A, Panasonic CR123A)
CAUTION: Risk of fire, explosion, and burns. Do not
recharge, disassemble, heat above 212
°F
(100
°C) or incinerate. Dispose of used batteries
promptly. Keep away from children.
Operating Temperature: 14
°F (-10°C) to 104°F
(+40
°C)
Operating Voltage: 3.2VDC
Dimensions:
3.1” length, 1.6”wide, 1.0”
depth
depth
Sensor Parameters:
Cold Temperature
(Freeze) Detector
(Freeze) Detector
45
°F (7°C)
Warm Temperature
Detector 75
Detector 75
°F (24°C)
Hot Temperature
Detector 95
Detector 95
°F (35°C)
Refrigerator Failure
Detector 42
Detector 42
°F (6°C)
Freezer Failure
Detector 10
Detector 10
°F (-12°C)
Hysteresis
✝✝✝
3
°F (-16°C)
Flood Sensor
¼ inch of water covering
the probe
the probe
Response Time
Tolerance
Tolerance
✝✝✝✝
+50%,
-20%
Temperature Measurement
Accuracy (internal temp. sensor
Accuracy (internal temp. sensor
or external temp. probe)
±3
°F (-16°C)
✝✝✝ Hysteresis is the temperature difference between “fault” and
“restore” points.
✝✝✝✝ The Response Time Tolerance is the time duration necessary
for the device to respond to a “fault” or “restore” condition.
This time does not take into account the time necessary for
the probe and circuitry to equalize to the ambient
temperature. This feature prevents false alarms due to open
doors and other transitory conditions.
This time does not take into account the time necessary for
the probe and circuitry to equalize to the ambient
temperature. This feature prevents false alarms due to open
doors and other transitory conditions.
TO THE INSTALLER
Regular maintenance and inspection (at least annually) by the
installer and frequent testing by the user are vital to continuous
satisfactory operation of any alarm system.
installer and frequent testing by the user are vital to continuous
satisfactory operation of any alarm system.
The installer should assume the responsibility of developing and
offering a regular maintenance program to the user as well as
acquainting the user with the proper operation and limitations of
the alarm system and its components parts. Recommendations
must be included for a specific program of frequent testing (at least
weekly) to ensure the system’s proper operation at all times.
offering a regular maintenance program to the user as well as
acquainting the user with the proper operation and limitations of
the alarm system and its components parts. Recommendations
must be included for a specific program of frequent testing (at least
weekly) to ensure the system’s proper operation at all times.
FCC / IC STATEMENT
This device complies with Part 15 of the FCC rules and RSS210 of
Industry Canada. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Industry Canada. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Unauthorized changes or modifications could void the user's
authority to operate the equipment.
authority to operate the equipment.
REFER TO THE INSTALLATION AND SETUP GUIDE FOR THE
CONTROL PANEL WITH WHICH THIS DEVICE IS USED FOR
WARRANTY INFORMATION AND LIMITATIONS OF THE
ENTIRE ALARM SYSTEM.
CONTROL PANEL WITH WHICH THIS DEVICE IS USED FOR
WARRANTY INFORMATION AND LIMITATIONS OF THE
ENTIRE ALARM SYSTEM.
2 Corporate Center Drive, Suite 100
P.O. Box 9040, Melville, NY 11747
Copyright
2008 Honeywell International Inc.
www.honeywell.com/security