Honeywell International Inc. 8DLFA270RF Manuale Utente
- 6 -
Step Action
Display
Enter [4] (Loop Functions). Enter the loop number (1-4).
Note: The FA270RF is shipped with the loop functions pre-
programmed. Perform steps 6 through 10 only if it is necessary
to change any of the loop functions.
Loop 1
to change any of the loop functions.
Loop 1
Close the FA270RF On-Board Relay for two seconds.
Loop 2
1 (Disarm)
Loop 3
2 (Arm Away)
Loop 4
3 (Arm Stay)
See the Wireless Key Function Chart below for the choices.
Wireless Key Function Chart
Function Entry
Disarming 1
Arming Away
2
Arming Stay
3
Arming Maximum (Away Instant)
4
Arming Instant
7
Panic Alarm
Produces type of alarm [* & #]
programmed in control panel.
programmed in control panel.
# + 99
Manually Start a Relay Action
# + 7
(FA142C)
# + 7 + n (FA148C, FA148CP,
FA162C,
FA162C,
FA168CP)
Manually Stop a Relay Action
# + 8
(FA142C)
# + 8 + n (FA148C, FA148CP,
FA162C,
FA162C,
FA168CP)
Activate Relay as Programmed in
Control
Control
# +71
(FA1220C, FA1220CV,
FA1340C,
FA1600CA)
Activate Relay as Programmed in
Control
Control
# + 72 (FA1220C, FA1220CV,
FA1340C)
FA1340C)
Activate Access Control Relay for
Partition
Partition
0
(FA1220C, FA1220CV,
FA1340C)
n = Device Number programmed in FA162C to be controlled
6
Press the [
✱] key.
Flashes "Ln."
Once the loop number is
entered, alternately flashes
"L" with the loop number
and the present function.
entered, alternately flashes
"L" with the loop number
and the present function.
Default Loop Functions
5 8 0 4
Loop 3
Arm AWAY
Arm AWAY
Loop 1
Close on-board relay
for 2 seconds
Close on-board relay
for 2 seconds
Loop 2
Disarm
Disarm
Loop 4
Arm STAY
5 8 0 4 B D / 5 8 0 4 B DV
Loop 3
Arm AWAY
Loop 1
Close on-board relay
for 2 seconds
Close on-board relay
for 2 seconds
Loop 2
Disarm
Disarm
SET
HOUSE
CODE
•
•
••
•
•
•
•
•
•
•
•
•
• •
•
•••
Loop 4
Arm STAY
Arm STAY
NOTE: If the loop is
defaulted with a function
(e.g., Arm, Disarm) and also
is assigned to activate the
on-board relay, the system
performs BOTH functions.
7
Repeat step 6 for the rest of the loops of the wireless key.
8
To program a button on the wireless key to control the on-board
relay, enter [5] (On-Board Relay Assignment).
relay, enter [5] (On-Board Relay Assignment).
Flashes "o-."
9
Enter the loop number of the wireless key (1-4). Enter the relay
action (0 = no action; 1 = relay off; 2 = relay on; 3 = relay toggles on
and off; 4 = relay closes for 2 seconds).
action (0 = no action; 1 = relay off; 2 = relay on; 3 = relay toggles on
and off; 4 = relay closes for 2 seconds).
Note: The relay action must be "0" for UL installations.
Press the [
✱] key.
Flashes “o” and the loop
number.
number.
Once the action is entered,
displays “o” and alternately
flashes the loop number and
the relay action.
displays “o” and alternately
flashes the loop number and
the relay action.
10
Repeat step 9 for the rest of the loops.
11
When all loops have been programmed for the wireless key, press the
[
[
✱] key.
Flashes “d” followed by the
device number.
device number.
12
The FA270RF automatically displays the next available device
number (one that does not have a serial number).
number (one that does not have a serial number).
If you want to program additional wireless keys, repeat steps 3
through 10. Otherwise, press the [#] key. This takes you back to the
main display, which alternately flashes “oo” and “- -.”
through 10. Otherwise, press the [#] key. This takes you back to the
main display, which alternately flashes “oo” and “- -.”
13
Enter [0] (High-Security Mode). To put the system into High-Security
mode, enter [1]. Enter [0] to disable
mode, enter [1]. Enter [0] to disable
En
14 Press
[
✱] to exit the FA270RF Program mode.
Note:
Upon exiting the Program mode, the FA270RF alternately flashes "Ad," the 2-digit keypad address, and the 2-digit
receiver address. If either of these is incorrect, repeat steps 1 through 3 in the Programming for an Installation
Without Local Wireless Keys section.
receiver address. If either of these is incorrect, repeat steps 1 through 3 in the Programming for an Installation
Without Local Wireless Keys section.