Honeywell International Inc. WFSRM Manuale Utente
36
SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000NF-E:C 5/8/2015
Wireless Devices
Configuration and Programming
Assigning a Profile Using SWIFT Tools
To assign a profile to the device using the SWIFT Tools application, do the following:
1. Connect the W-USB dongle device to your computer. For more information on the USB
2. Launch the SWIFT Tools application. Refer to Appendix A, “SWIFT Tools” for more
information.
3. From the Home Screen, select the Create Mesh Network function.
4. Create a new profile or import an existing profile as required.
5. Select and open the profile to be assigned to the gateway from the Name drop-down box in the
4. Create a new profile or import an existing profile as required.
5. Select and open the profile to be assigned to the gateway from the Name drop-down box in the
Profile section.
6. Power on the device within approximately 20 feet of the laptop running SWIFT Tools.
7. Ensure that the Scan On selection box is checked.
7. Ensure that the Scan On selection box is checked.
Figure 3.2 Magnetic Sensor on a Module
m
ag
ne
tm
on
.w
m
f
Magnetic
sensor
sensor
Figure 3.3 Creating or Importing a Profile
cr
ea
te
pr
ofi
le
.w
m
f