ICOM 375410 Manuale Utente
32
6
SCANNING
6
201802
201802
BASIC MANUAL
■
VFO scan
The VFO scan searches for a signal within
the specified frequency range.
L
See
page 31
for details of ‘Starting or
canceling the scan.’
D
Full scan (ALL)
Repeatedly scans the entire band.
IC-R30 frequency
lower end
IC-R30 frequency
upper end
Scan
Jump
PSKIP
PSKIP
D
Band scan (BAND)
Repeatedly scans the selected band.
Band frequency
lower end
Band frequency
upper end
Scan
Jump
PSKIP
PSKIP
D
Program scan (P00 ~ P49)
Repeatedly scans the selected Program
Scan range (P-Scan Edge 00 ~ 49).
Scan
Jump
Jump
Scan range
Lower edge
Upper edge
PSKIP
PSKIP
At least one Program Scan range (P-Scan
Edges) must be entered to start a Program
scan.
([MENU] > Scan >
P-Scan Edge)
See
page 33
for more details.
D
Program Link scan
(P-LINK 0 ~ 9)
Sequentially scans the Program Scan
ranges. The links are set on the MENU
screen. ([MENU] > Scan >
Program Link)
See
page 34
for more details.
Program scan edges (Example: P00 ~ P10)
Jump
Scan
P00 P01 P02 P03
P10
L
While scanning, push [BAND] to move to
the next Program scan range.
D
Auto memory write scan
(Auto MW)
When a signal is received during a VFO
scan, the frequency is automatically stored
into an Auto Memory Write channel group
(A000 ~ A199).
Scan
Signal received
Jump
Scan range
A000
Channels
A002
A001
A199
L
Information
•The Auto Memory Write scan writes
to a memory channel when the scan
automatically resumes.
•When no blank channels is left in the
Auto Memory Write channel group A
(000 ~ 199), the scan automatically
cancels.
•When you start this scan, you can
skip the following dialog in the Menu
screen.
“ Clear All memories in the group A?
(The Auto MW Scan will then start.)
( [MENU] > Scan >
Auto MW SCAN
Memory Clear)
OFF: Writes to a blank channel in the group
A.
Display Dialog: Display dialog to confirm.
ON: Clears all memories in the group A.