NEC EXPRESS 5800 Manuale Utente

 

This appendix contains supplemental instructions needed to install and configure hardware and
software used with the Microsoft Operating System Windows NT Release 4.0. This information is
intended to supplement the more detailed procedural documents available from Microsoft. This
information is not intended to be the central source of installation and configuration information for
your system. Read this entire appendix along with Microsoft's Windows NT 4.0 installation procedures
before starting the installation process.

IMPORTANT:  Read the System Release Notes for the latest system
information before attempting to install Windows NT 4.0 Operating System on
your system.

The drivers required for the devices listed

 

in the table below are located on the EXPRESSBUILDER

CD. To create the required diskettes, select “Tools” on the

 

EXPRESSBUILDER CD. This table lists the

required diskette labels.

 When creating the required diskettes from the

EXPRESSBUILDER CD make sure you use the drivers required for the
devices on your specific system.

Always read the information in the release notes or inserts, included with any
options for they supersede the information in this guide.

SCSI or SCSI RAID Controller

Windows NT 4.0 OEM - Disk #1*

Network Controller

Windows NT 4.0 OEM - Disk #2*

System Board

Windows NT 4.0 NEC Update Module**

Video

RAGE XL Driver for Windows NT 4.0**

  *Diskette generated from the NEC EXPRESSBUILDER CDROM
 **Run this application from the EXPRESSBUILDER CDROM; diskette not required