Sharp UX-B800SE ユーザーズマニュアル

4. Receiv

ing 

Fa

x

e

s

machine’s handset, and press 

.

•

The above step is necessary if you 
have set the “FAX SIGNAL RX” 
setting to NO (pp. 45 and 47).

To put the other party on hold during a 

phone call, press 

. When this is 

done, they cannot hear you. You can 
put the handset back in the cradle 
without breaking the connection. When 
you are ready to speak with the other 
party again, pick up the handset. If you 
did not put the handset back in the 

cradle, press 

 again to resume 

conversation.

To select TEL/FAX mode, press 

 (with no document in the 

feeder) until [TEL/FAX] appears in 
the display.

When the reception mode is set to TEL/
FAX, the machine automatically 
answers all calls on 2 rings. After 
answering, the machine monitors the 
line for about five seconds to see if a 
fax tone is being sent.

♦

If the machine detects a fax tone (this 
means that the call is an 
automatically dialed fax), it will 
automatically receive the fax.

♦

If your machine doesn't detect a fax 
tone (this means that the call is a 
voice call or manually dialed fax), it 
will make a special ringing sound for 
15 seconds to alert you to pick up the 
machine’s handset (to change the 
number of seconds, see p. 45 and 
“PSEUDO RING DURATION” on p. 
46). If you don't answer within this 
time, the machine will send a fax tone 
to the other machine to allow the 
calling party to send a fax manually.

Note: Only the machine will make the 
special ringing sound. An extension 
phone will not ring after the machine 
initially answers the call.

Incoming faxes will be received to 
memory when printing is not possible, 
such as when the machine runs out of 
paper, the print cartridge needs 
replacement, or the paper jams.

When you have received a fax in 
memory, [FAX RX IN MEMORY] will 
appear in the display, alternating with a 
message that indicates the problem. 

When you resolve the problem, the 
stored faxes will automatically print out.

♦

If you received faxes to memory 
because the machine ran out of 
paper, be sure to add paper that is 
the same size as the paper 
previously used, or the fax print-out 
size will not match the size of the 
printing paper.