Sharp UX-B800SE ユーザーズマニュアル

Load the document(s).  (Maximum 
of 20 letter sheets or 5 legal sheets.)

•

If desired, press 

 to set the 

resolution and/or contrast.

Select the following copy settings as 
needed:

•

Enlarge/reduce: Press 

 or 

 to select 100%, 125%, 135%, 

200%, 70%, 88% or 94%. 
Default setting: 100%.

•

Number of copies per original: 
Enter a number from 1 to 99. 
Default setting: 1

Example: Press 

 for two copies

When you are ready to begin 

copying, press 

.

Example: Two copies 
each of three originals

Sorting copies
The machine is initially set to not sort 
copies. If you wish to have copies 
sorted as shown below, change the 
“SORT COPY” setting to YES (pp. 45 
and 49).

The machine can be used as a 
convenience copier. Follow the steps 
below to make copies.

If [MEMORY FULL] appears...
If you place many originals in the 
feeder, the memory may become full 
before all pages can be scanned (the 
display will show [MEMORY FULL]). If 
this happens, only the pages that were 
scanned will be copied and the 
remaining pages will automatically feed 
out. Repeat the copy procedure for the 
remaining pages, including the page 
that was being scanned when the 
memory became full.

Note: It may not be possible to make a 
copy of an original if a high resolution 
setting is used and/or the original 
contains so much detailed content that 
the memory becomes full before 
scanning finishes.