Chicago Electric 42933 ユーザーズマニュアル

SKU 42933

For technical questions, please call 1-800-444-3353.

Page 16

OpeRAtIOn

WARnIng: the Radial Arm Saw can be

very dangerous and cause serious

injuries if not operated properly.

Review all safety precautions be-

fore operating. keep hands out of

the path of the moving Saw Blade.

cross cutting

1. Secure the stock to be cut against the

table and fence.

If the stock length is short, do not

hold with your hand. Use a clamp to

hold in place.
Adjust the Anti-kickback Arm (13) so

it just clears the stock.
Check that the Pivot Yoke Clamp

Lock and Bevel Index Knob are set to

0° and are secure in place.
Adjust the Elevating Handle (100) so

the Saw Blade (17) height is only 1/8”

into the worktable.
Push the Handle backward so that

the Saw Blade is in behind the stock

to be cut.
Press the green Switch (122).

Squeeze the Handle Trigger and

slowly pull the Handle toward you,

causing the Saw Blade to cut the

stock.
When the cut is complete, release the

Trigger and push the Handle all the

way back.

Wait for the Saw Blade to stop turning

before removing the stock.

Mitre cross cutting

1. Loosen the yoke Clamp Handle (66)

and pull out the Yoke Index Knob.
Turn the motor assembly to the left or

right and lock the Yoke Index Knob at

45°.
Tighten the yoke Clamp Handle (66).

Push the Handle backward so that

the Saw Blade is in behind the stock

to be cut.
Secure the stock to be cut against the

table and fence.

If the stock length is short, do not

hold with your hand. Use a clamp to

hold in place.
Adjust the Anti-kickback Arm (13) so

it just clears the stock.
Press the green Switch (122). De-

press and hold the Trigger in. Slowly

pull the Handle toward you, causing

the Saw Blade to cut the stock.
When the cut is complete, release the

Trigger and push the Handle all the

way back.
Wait for the Saw Blade to stop turning

before removing the stock.