Ricoh AP400 ユーザーガイド
Appendix
118
7
❖
❖
❖
❖ Configuration
Use the set command to make WINS active or inactive.
msh> set wins {on|off}
• "on" means active and "off" means inactive.
❖
❖
❖
❖ Address configuration
Use this command to configure a WINS server IP address.
msh> wins {primary|secondary} IP_address
Note
❒ Use the "primary" to configure a primary WINS server IP address.
❒ Use the "secondary" to configure a secondary WINS server IP address.
❒ Use the "secondary" to configure a secondary WINS server IP address.
AutoNet
Use the "autonet" command to configure AutoNet settings.
❖
❖
❖
❖ Display
The following command displays the current AutoNet settings.
msh> autonet
❖
❖
❖
❖ Configuration
You can configure the AutoNet settings.
msh> autonet interface_name {on|off}
Note
❒ Select [on] to enable AutoNet.
❒ Select [off] to disable AutoNet.
❒ Select [off] to disable AutoNet.
❖
❖
❖
❖ Interface Priority Configuration
You can assign priorities governing which interface obtains AutoNet param-
eters.
eters.
msh> autonet priority interface_name
Note
❒ Priority assignment is useful when connecting more than one interface to
the machine.
❒ If an interface is not selected, the interface appears according to the cur-
rently set priority, regardless of multiple interface connections.
*1
Available when the optional 802.11b interface kit is installed.
*2
Available when the optional 1394 interface board is installed.
Interface name
Interface to be configured
ether
Ethernet interface
IEEE 802.11b interface
ip1394
IEEE 1394 interface