Canon ir2016, ir2020 マニュアル

3-13

F-3-77

1) Open the front cover of the host machine.

2) Remove the four RS tightening screws (M3 x 8) [1], and then detach the

rear cover [2].

F-3-78

1) Remove all connectors from the finisher controller PCB [1], and then open

the two wire saddles [2].

2) Open ten wire saddles[3] and then remove the harnes.

F-3-79

3) Remove two wire saddles[4] behind the finisher controller, and then re-

move the harnes[5].

F-3-80

4) Remove the two RS tightening screws (M3 x 8) [1], and then remove the

finisher controller PCB [2] together with the mount.

F-3-81

5) Remove the timing belt [1].

F-3-82

1) Remove the stepped screw [1] (front side) and RS tightening screw (M3

x 8) [2], and then remove the inlet guide [3].

F-3-83

1) Remove the RS tightening screw (M3 x 8) [1]. Remove the two reusable

bands [2] using pliers or the like, and then remove the harness from the edge

saddle [3].

2) Remove the harness [5] from the guide [4], and then remove the front cov-

er safety switch [6].

[1]

[2]

[1]

[2]

[1]

[2]

[3]

[3]

[3]

[5]

[4]

[1]

[2]

[1]

[1]

[3]

[2]