Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. HP
  4. ProLiant ML330 G6
  5. ユーザーズマニュアル

HP ProLiant ML330 G6 ユーザーズマニュアル

ダウンロード
ページ / 129
 
Hardware options installation 54 
The server is not shown for clarity. 
 
8. 
Install a SATA RAID controller ("
). 
9. 
Connect the SATA controller cable to the RAID controller. 
10. 
Connect the hard drive data cable to the hard drive backplane connectors on the system board 
). 
  
 
CAUTION:
  To prevent improper cooling and thermal damage, do not operate the server unless 
all bays are populated with either a component or a blank. 
  
11. 
Install any hard drives or blanks ("
12. 
Install the air baffle. 
13. 
Install the access panel (on page 
). 
14. 
Do one of the following: 
o 
Close or install the tower bezel, as needed. 
o 
Slide the server back into the rack. 
15. 
Power up the server (on page 
 
Expansion hard drive cage option (non-hot-plug) 
To install the component: 
1. 
Power down the server (on page 
2. 
Do one of the following: 
o 
Open or remove the tower bezel, as needed ("
). 
o 
Extend the server from the rack (on page 
3. 
Remove the access panel (on page 
). 
4.