HP ProLiant ML330 G6 ユーザーズマニュアル

 

Hardware options installation 57 

Identifying guide screws 

When installing drives in the removable media bay, guide screws must be installed so that the drives 

align correctly in the drive cage. HP has provided extra guide screws, located behind the side access 

panel. Depending on the option, use 5.25 M3 metric screws or HD 6-32 shipping screws. The metric 
screws supplied by HP are black. 

 

 

SATA optical drive option 

For clarity, the following illustrations include option cabling only. 

  

 

CAUTION:

  To prevent improper cooling and thermal damage, do not operate the server unless 

all bays are populated with either a component or a blank. 

  

To install the component: 

1. 

Power down the server (on page 

2. 

Do one of the following: 

o 

Open or remove the tower bezel, as needed ("

). 

o 

Extend the server from the rack (on page 

). 

3. 

Remove the access panel (on page 

). 

4. 

Remove the applicable media bay blank ("

5. 

Identify the guide screws ("