HP ProLiant ML330 G6 ユーザーズマニュアル
Hardware options installation 59
10.
Remove the applicable bezel blank from the bezel ("
).
11.
12.
Do one of the following:
o
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
13.
Power up the server (on page
USB tape drive option
For clarity, the following illustrations include option cabling only.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To install the component:
1.
Power down the server (on page
).
2.
Do one of the following:
o
Open or remove the tower bezel, as needed ("
o
Extend the server from the rack (on page
3.
Remove the access panel (on page
4.
Remove the applicable media bay blank ("
).
5.
Identify the guide screws ("
6.
Install the guide screws.