APC ups network management card 2 ap9630 ユーザーズマニュアル

You can use the APC Device IP Configuration Wizard at a computer running 
Microsoft

®

 Windows

®

 2000, Windows Server

®

 2003, or Windows XP to 

discover unconfigured Network Management Cards and configure their basic 
TCP/IP settings, one card at a time, over the network. 

Note: Most software firewalls must be temporarily disabled for the 
Wizard to discover unconfigured Network Management Cards.

1.    If autorun is enabled, the user interface of the CD starts when you insert 

the APC Network Management Card Utility CD into a computer on your 
network. Otherwise, open the file contents.htm on the CD. 

2.    Select the Device IP Configuration Wizard from the main menu.

3.    When the Wizard discovers the unconfigured Network Management 

Card, follow the on-screen instructions.

Note: If you leave the option Start a Web browser when finished 
enabled, you can access the Network Management Card through 
your browser by using apc (the default) for both the user name and 
password.

You can use the .ini file export utility to export .ini file settings from configured 
Network Management Cards to one or more unconfigured Network 
Management Cards. The utility and documentation are included on the APC 
Network Management Card Utility CD.

The default TCP/IP configuration setting, DHCP, assumes that a properly 
configured DHCP server is available to provide TCP/IP settings to Network 
Management Cards. You can also configure the setting for BOOTP. 

A user configuration (.ini) file can function as a BOOTP or DHCP 
boot file. For more information, see the TCP/IP configuration 
section of the Network Management Card User’s Guide, available 
from the Utility CD or the APC Web site, www.apc.com.

If neither of these servers is available, see “APC Device IP 
Configuration Wizard” on page 9, “Local access to the command 
line interface” on page 11, or “Remote access to the command line 
interface” on page 12 to configure the needed TCP/IP settings.