Sensors & Software Inc. NG250 ユーザーズマニュアル
Noggin
4-SmartCart Assembly
11
4.5 Attaching the Noggin to the SmartCart
The Noggin is attached to the cart with the long axis of the Noggin unit parallel to the wheels on
the cart (see Figure 4-9 and Figure 4-10). Ensure the 37 socket female electrical receptacle on
the Noggin faces the back of the cart so that the cable on the cart will reach the receptacle.
the cart (see Figure 4-9 and Figure 4-10). Ensure the 37 socket female electrical receptacle on
the Noggin faces the back of the cart so that the cable on the cart will reach the receptacle.
4.5.1
Noggin 250
Remove the Clevis pins from the swivel adapters. Now, on the bottom of the cart, locate the 4
oval, moveable hangers suspended from the frame of the cart (see Figure 4-9). Notice that each
hanger has a hole in it. To attach the Noggin 250 to the cart, place each hanger into the slot on
the top of the swivel adapters, line up the holes and insert the Clevis pin.
oval, moveable hangers suspended from the frame of the cart (see Figure 4-9). Notice that each
hanger has a hole in it. To attach the Noggin 250 to the cart, place each hanger into the slot on
the top of the swivel adapters, line up the holes and insert the Clevis pin.
Figure: 4-9 Attaching the Noggin 250 to the SmartCart.
Connect the 37 pin end of the Noggin-to-DVL cable to the receptacle on the Noggin and secure
this attachment with the latch.
this attachment with the latch.