Sensors & Software Inc. NG250 ユーザーズマニュアル
4-SmartCart Assembly
Noggin
12
4.5.2
Noggin 500 & Noggin 1000
Remove the Clevis pins from the swivel adapters. Now, on the bottom of the cart, locate the two,
flat, moveable crossbars suspended from the frame of the cart.
flat, moveable crossbars suspended from the frame of the cart.
Notice that each crossbar has 2 holes, one on each side. To attach the Noggin 500 to the cart,
place the crossbars into the slots on the top of the swivel adapters, line up the holes and insert
the Clevis pins (Figure 4-10).
place the crossbars into the slots on the top of the swivel adapters, line up the holes and insert
the Clevis pins (Figure 4-10).
Figure: 4-10 Attaching the Noggin 500 and Noggin 1000 to the cart.
Connect the 37 pin end of the Noggin-to-DVL cable to the receptacle on the Noggin and secure
this attachment with the latch.
this attachment with the latch.