Proxim Wireless Corporation XB92WFR ユーザーズマニュアル

For some reason, if the configured syslog host parameters are changed then you can edit it directly in the Syslog Host Table
entry. You can change the following parameters:

•

•

•

•

Entry Status: 

– Enable: By default, the configured Syslog host is enabled on the device.

– Disable: To disable an entry in the Syslog Host Table, click Disable.

– Delete: To delete the configured Syslog host, click Delete.

After doing the necessary changes, click OK followed by COMMIT.

Proxim’s point-to-multipoint and point-to-point devices are furnished with Simple Network Time Protocol (SNTP) Client
software that enables to synchronize device’s time with the network time servers. 

The SNTP Client when enabled on the device(s), sends an NTP (Network Time Protocol) request to the configured time servers.
Upon receiving the NTP response, it decodes the response and sets the received date and time on the device after adjusting
the time zone and day light saving.

In case, the time servers are not available, then users also have the option to manually set the date and time on the device.

To synchronize device’s time with time servers or manually set the time, navigate to MANAGEMENT > SNTP.  The  SNTP
screen appears: